The 36"W X 17"H deluxe wine storage racks from Omega National Products have panels produced from sturdy mouldings and come in maple wood.

Deluxe Wine Rack 36"W X 17"H Maple

Panels are produced from sturdy moulding 3/4" wide x 7/16" thick with routed face
Bottle openings are 3-3/4" x 3-3/4"

This product is lattice only, not stemware holder or framing. This product ships from the vendor. Shipping time is typically 2-3 business days.

*Boxed two pieces per carton. Sold as a pair (front and back holders)

Instructions:
1.) Measure the inside of the cabinet where you plan to install the wine rack. Mark the same measurements on both panels, making the marks so the lattice panels remain symmetrical. Mark the lattice panels and cut along the lines you marked. Sand the cut portions of the lattice panels until they are smooth.
2.) Construct a cleat frame (3/4”) to mount the lattice and attach it to the inside of the cabinet.
3.) The Lattice will need to be installed in front of the back of the cabinet so that the bottle will rest on the lattice (Ref= 4” from the back). Space Lattice Panels at approximately 6 - 7” apart as necessary per bottle size.
4.) Pin nail through the top and bottom of the cabinet to lattice panels and frame to secure.